BEC Block End Conditional
Format
BEC
Description
If RLO = 1, then BEC (block end conditional) interrupts the program scan in the current block and causes a jump to the block that called the current block. The program scan resumes with the first instruction that follows the block call. The current local data area is released and the previous local data area becomes the current local data area. The data blocks that were current data blocks when the block was called are re-opened. The MCR dependency of the calling block is restored.
The RLO (= 1) is carried over from the terminated block to the block that called. If RLO = 0, then BEC is not executed. The RLO is set to 1 and the program scan continues with the instruction following BEC.
Status word
BR CC? CC? OV OS OR STA RLO /FC
writes: - - - - x 0 1 1 0
Example
STL Explanation
A I 1.0 //Update RLO.
BEC //End block if RLO = 1.
L IW4 //Continue here if BEC is not executed, RLO = 0.
=====================================================
BEU Block End Unconditional
Format
BEU
Description
BEU (block end unconditional) terminates the program scan in the current block and causes a jump to the block that called the current block. The program scan resumes with the first instruction that follows the block call. The current local data area is released and the previous local data area becomes the current local data area. The data blocks that were opened when the block was called are re-opened. In addition, the MCR dependency of the calling block is restored and the RLO is carried over from the current block to the block that called the current block. BEU is not dependent on any conditions. However, if the BEU instruction is jumped over, the current program scan does not end and will continue starting at the jump destination within the block.
Status word
BR CC? CC? OV OS OR STA RLO /FC
writes: - - - - 0 0 1 - 0
Example
STL Explanation
A I 1.0
JC NEXT //Jump to NEXT jump label if RLO = 1 (I 1.0 = 1).
L IW4 //Continue here if no jump is executed.
T IW10
A I 6.0
A I 6.1
S M 12.0
BEU //Block end unconditional.
NEXT: NOP 0 //Continue here if jump is executed.
T MW10
